Share:
PRODUCT DESCRIPTION
Elevate your home’s aesthetic with the sophisticated brilliance of Nippon Paint Metallic Paint. This high-performance, solvent-based thermoplastic-acrylic paint is specifically engineered to deliver a stunning metallic shimmer on masonry, wood, and metal surfaces.Technical Data
-
Paint Type: Solvent-based (Thermoplastic Acrylic).
-
Finishing: Gloss Metallic.
-
Drying Time: Touch Dry in 15 minutes; Hard Dry in 45 minutes (at 28–32°C).
-
Recoating Interval: Minimum 2 hours.
-
Theoretical Coverage: 9 – 11 m² per litre per coat (dependent on surface porosity).
-
Number of Coats: Minimum 2 coats recommended for optimum opacity and effect.
-
Shelf Life: Up to 36 months in a tightly sealed container.
Application Instruction
- Application Method: Can be applied using a brush, roller, or conventional air spray.
For large areas, spraying is recommended for the most uniform metallic distribution.
- Thinning: The paint is ready to use. If necessary, dilute with a maximum of 5% Nippon Acrylic 3000 Thinner for brush/roller application or spray.
-
Cleaning: Clean all equipment immediately after use with Nippon Acrylic 3000 Thinner.
Recommended Coating System
-
For Wood: * Primer: 1 coat of Nippon Hydro Primer or Nippon 8048 Zinc Phosphate Primer.
-
Topcoat: 2 coats of Metallic Paint.
-
-
For Metal: * Primer: 1 coat of Nippon Aquatec 1900 Red Oxide Primer or 8048 Zinc Phosphate Primer.
-
Topcoat: 2 coats of Metallic Paint.
-
-
For Masonry/Walls: * Sealer: 1 coat of Nippon 5200 Wall Sealer or 8000 Advanced Sealer.
-
Topcoat: 2 coats of Metallic Paint.
-
Surface Preparation
-
Cleanliness: Ensure the surface is completely dry and free from dirt, grease, oil, and other contaminants before painting.
-
Old Paint Removal: Remove all loose, defective, or powdery paint residues and fungal growth using high-pressure water jetting or wire brushing.
-
Repairing Defects: Repair cracks or uneven surfaces with a suitable filler (e.g., Nippon Multi-Purpose Joint Compound). Sand smooth once dry.
-
Moisture Content: For masonry, ensure the moisture content is below 16% (measured by protimeter) and alkalinity is below pH 9.
-
Sanding: For wood and metal, lightly sand the surface with fine-grit sandpaper to improve adhesion, then wipe away all dust.
Ready to order or need expert advice?
Contact us on WhatsApp now for fast response, latest prices, and product recommendations. Our team is ready to support your project with the right solution—quickly and hassle-free!
Inquiry - Nippon Paint Metallic Paint - Metallic Shimmer
